# Extractmeshface 会挂掉Rhino

**URL:** <https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843>\
**Category:** Rhino Windows 版\
**Created:** [2016年一月24日 14:39 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843 "2016-01-24T14:39:34Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2016年一月24日 14:39 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843/1 "2016-01-24T14:39:35Z")

</div>

档案私下发了 Kelvin.

用Extractmeshface指令选择一个mesh面，我这边Rhino会挂掉. 请测试…

还有，问下MAKE2D后 怎么不能得出所有曲线呢？

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2016年一月25日 01:25 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843/2 "2016-01-25T01:25:35Z")

</div>

> [@anon667555](#):
>
> 用Extractmeshface指令选择一个mesh面，我这边Rhino会挂掉. 请测试…

我試的時候發生過一次，還沒試出第二次，如果你知道  
抽離那些面會發生問題，請把那些面標示出來，謝謝。

[quote=“anon667555, post:1, topic:843”]  
还有，问下MAKE2D后 怎么不能得出所有曲线呢？[/quote]

你是指這個模型做 Make2D 時嗎?

---

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2016年一月25日 05:18 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843/3 "2016-01-25T05:18:57Z")

</div>

刚试了。试不出来了。

> [@KelvinC](#):
>
> 你是指這個模型做 Make2D 時嗎?

就是把wireframe MAKE2D出来…

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2016年一月25日 07:49 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843/4 "2016-01-25T07:49:41Z")

</div>

> [@anon667555](#):
>
> 就是把wireframe MAKE2D出来…

試試看把那個 Mesh 用 ExtractWireframe 指令，然後選取那個 Mesh 與抽出來的線，在 Shaded Display mode 一起做 Make2D。

---

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2016年一月25日 07:55 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843/5 "2016-01-25T07:55:07Z")

</div>

这个方法太费时间… 要extract然后再make2D你可以想象了. 我以为V6里的make2D可以调出来…

无所谓了，反正打印出来太黑，看不清楚。直接渲染了…

再加上CURVEBOOLEAN。。。挂了就…

 ![](https://discourse-cdn-aws1.com/mcneel/uploads/mcneel_cn/original/1X/7a32861b6056675fc281b3b06d12ca38fd2c17a5.png)

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2016年一月25日 08:17 UTC](https://cn.discourse.mcneel.com/t/extractmeshface-rhino/843/6 "2016-01-25T08:17:17Z")

</div>

用我的方法做 Make2D 記憶體用掉 1.5G，CurveBoolean 應該是不適用這麼多線的情形。

ExtractWireframe 指令抽出的曲線超過 10000 就會警告，你給我的例子中的一個 Mesh 就有 41920 條，你圖中這個 Mesh 更複雜，CurveBoolean 不太可能做的出來。
