# 关于挑动影响曲率的问题

**URL:** <https://cn.discourse.mcneel.com/t/topic/587>\
**Category:** Rhino Windows 版\
**Created:** [2015年三月22日 00:00 UTC](https://cn.discourse.mcneel.com/t/topic/587 "2015-03-22T00:00:53Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2015年三月22日 00:00 UTC](https://cn.discourse.mcneel.com/t/topic/587/1 "2015-03-22T00:00:53Z")

</div>

@kelvinC

记得最近有人提过这功能。不知道进入wishlist了没有。

挑动影响曲率的点，链接在一起的曲率点也会跟着变化功能。

![](https://sea3.discourse-cdn.com/mcneel/uploads/mcneel_cn/651/d3e2882a7aafa2b7.png)

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2015年三月22日 04:11 UTC](https://cn.discourse.mcneel.com/t/topic/587/2 "2015-03-22T04:11:23Z")

</div>

這個當然有在 Wish List 上，這個功能不只是 MatchSrf + History，不過 History 只有 父 \> 子 單向互動，這個功能需要兩個曲面的控制點參考曲率雙向互動，Rhino 要做到可能蠻困難的吧。

---

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2015年三月22日 04:34 UTC](https://cn.discourse.mcneel.com/t/topic/587/3 "2015-03-22T04:34:34Z")

</div>

原来如此，我就想到了 MatchSrf + History可以做到。如果加入CP就可以想象难度了。

---

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2015年三月22日 04:47 UTC](https://cn.discourse.mcneel.com/t/topic/587/4 "2015-03-22T04:47:02Z")

</div>

@kelvinC

一个问题一直搞不明白，为什么MOVEUVN点了两个曲面上的控制点以后，在N方向移动时为什么控制点是反方向移动？ 如果往一个方向上移动就不需要历史功能也可以做出好的面。 控制点往两个方向走，简单地说

![](https://sea3.discourse-cdn.com/mcneel/uploads/mcneel_cn/653/8e9b4f01925da6d6.jpg)

档案，请测试  
[Test.3dm](https://cn.discourse.mcneel.com/uploads/mcneel_cn/652/b354bf04d8c9e766.3dm) (31.9 KB)

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2015年三月23日 03:31 UTC](https://cn.discourse.mcneel.com/t/topic/587/5 "2015-03-23T03:31:16Z")

</div>

這是因為兩個曲面的法線方向不一樣。

![](https://sea3.discourse-cdn.com/mcneel/uploads/mcneel_cn/655/6d2461d3691ff875.png)

---

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2015年三月23日 03:55 UTC](https://cn.discourse.mcneel.com/t/topic/587/6 "2015-03-23T03:55:33Z")

</div>

@KelvinC 正是如此 😄 多谢~

还有UV方向怎么判断？ 我以前用设置里 显示UV方向颜色来判别。除了这个有没有一眼判断的？

还有 UV方向建模时 经常会颠倒，原因是什么？ 每次用dir指令麻烦。 这个好像也有人提过。

什么因素决定UV的颠倒？

---

<div class="post-metadata">

**Author:** ![anon667555](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/anon667555/32/3067_2.png) [@anon667555](https://cn.discourse.mcneel.com/u/anon667555)\
**Post date:** [2015年三月25日 00:13 UTC](https://cn.discourse.mcneel.com/t/topic/587/7 "2015-03-25T00:13:50Z")

</div>

@KelvinC

MOVEUVN功能不能解决曲率问题， 我疏忽了两个面N方向不同时。 这是没法做到的。 还是带历史的好。

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2015年三月25日 04:09 UTC](https://cn.discourse.mcneel.com/t/topic/587/8 "2015-03-25T04:09:43Z")

</div>

> [@anon667555](#):
>
> 我以前用设置里 显示UV方向颜色来判别

改變 N 的方向時 UV 的方向可以不變，所以看 UV 的方向不能確定 N 的方向。

曲面的 N 方向如果未刻意改變過，那用右手定則是可以從 UV 看出 N 的方向。

UV 方向是建立曲面時決定的，例如 Sweep1 建立曲面時，Sweep 的方向不同 UVN 方向也可能不同。

曲面相互 Join 時也會改變 N 的方向，不然 Join 得到的 Polysurface 的面可能會有的朝內、有的朝外。

大部分建模 N 的方向並不重要，決定 UVN 方向的變因太多，只能遇到有問題再調整了。

---

<div class="post-metadata">

**Author:** ![KelvinC](https://sea3.discourse-cdn.com/mcneel/user_avatar/cn.discourse.mcneel.com/kelvinc/32/3391_2.png) [@KelvinC](https://cn.discourse.mcneel.com/u/KelvinC)\
**Post date:** [2015年三月25日 04:11 UTC](https://cn.discourse.mcneel.com/t/topic/587/9 "2015-03-25T04:11:44Z")

</div>

> [@anon667555](#):
>
> MOVEUVN功能不能解决曲率问题

當然，手工調整曲面控制點又要維持 G2 幾乎是不可能。
